I love playing around with different ingredients in my soap formulations, and goat’s milk can make a soap bar so much more luxurious. I have three wonderful goat milk soaps to share with you: a rosemary and mint soap, a creamy goat’s milk soap, and a chocolate milk soap.
Whenever I use fresh milk inmy cold process soapmaking, I always choose goats milk, it’s a lot easier to use than cow’s milk and I’ve always had great success with it. Let’s take a look at how to make this.
Jump to How-To Jump to Video
Table Of Contents Hide
Benefits Of Goat Milk Soap
Freezing The Milk First
Try To Source The best Goats Milk
The Essential Oils I’m Using
Luxurious DIY Goat Milk Soap Recipe
Ingredients
Equipment
Video
Instructions
Creamy Goats Milk Soap Recipe
Ingredients
Method
Photos From Making This Soap
Yummy Homemade Chocolate Soap
Ingredients
Method
Photos From Making Homemade Chocolate Soap
Benefits Of Goat Milk Soap
The goat’s milk within this recipe can help with dry and itchy skin so it is a great choice if you suffer from Eczema or Psoriasis. However, if you already have healthy skin, goat’s milk soap can help to maintain this.
Goats milk is often touted as a natural remedy for dry skin. The fats and proteins in goats milk can help to replenish the skin, while the lactic acid helps to exfoliate and remove dead skin cells. It’s also less drying than a normal soap made with water. As a result, goats milk can leave your skin feeling softer and smoother.
So, if you’re looking to try goats milk on your skin, there are a few different ways to do it. Of course, you can make your own goat milk soap at home, and that’s what we are doing here. But just for your info, you could, for example, add goats milk to your favorite face mask recipe for an extra boost of hydration.
Whichever way you choose to use it, goats milk is an excellent natural option for improving the condition of your skin. However, if this is the first time you’re using fresh milk in soap there are a few things you may wish to consider.
Freezing The Milk First
First of all, fresh goat’s milk will more than likely change the color of your soap to a deep honey color. So it’s not very suitable for use with any pigments. It also tends to have a strong smell; thankfully this doesn’t stay with the finished soap!
The reason for this is that adding lye to your milk heats it so quickly (often to over 150°F) that it can burn the milk which produces a darker color. It also has a tendency to curdle your soap, which is never a good thing!
You can avoid these issues by freezing the milk before adding the lye. I simply pour it into an ice cube tray the evening before so that it’s frozen solid before I use it. The colder your milk is the lighter your soap will be.
Try To Source The best Goats Milk
You can buy goats milk from your local supermarket if needed. However if you can get organic, grass-fed goat’s milk locally at a farmer’s market then definitely give that a go. Fresh is always best in my book!
The Essential Oils I’m Using
For the rosemary and mint goats milk soap recipe, I used rosemary essential oil to compliment the goat’s milk with its soothing properties which again help with dry skin. It also brings a lovely woodsy scent to the soap.
I used mint essential oil too as it helps to tone the skin as well as hydrate and rejuvenate. It has a cool and refreshing aroma that blends wonderfully with the rosemary.
Luxurious DIY Goat Milk Soap Recipe
Whenever I use fresh milk in my soapmaking I always choose goats milk, it's a lot easier to use than cow's milk and I've always had great success with this goats milk soap recipe.
Rate This Project
4.9 from 9 votes
Print Comment Pin
Prep Time: 1 day day
Active Time: 1 day day
Total Time: 2 days days
Yield: 12 Bars (approx)
Difficulty Level: Intermediate
Author: Angela Wills
As an Amazon Associate, I earn from qualifying purchases. If you buy via the links here I may earn a small affiliate commission at no cost to you.
Ingredients
- 315 grams Coconut Oil
- 360 grams Olive Oil
- 100 grams Sunflower Oil
- 80 grams Castor Oil
- 45 grams Cocoa Butter
- 256 grams Goats Milk (Frozen In Cubes)
- 128 grams Soapmaking Lye
- 15 grams Rosemary Essential Oil
- 15 grams Peppermint Essential Oil (Spearmint and Wintergreen are good too)
Equipment
Ice Cube Tray
Mixing Bowl (Glass, Aluminium or PET)
Spoon or Spatula
Video
Instructions
Freeze the goat milk overnight.
If you’ve not made soap before, take a look at myfull cold process tutorial here.
Put on your protective clothing, gloves, mask, and glasses. I always find it best to then prepare and weigh all of the ingredients before starting.
Pop the goats milk ice cubes into a jug then carefully add the lye. Once the lye has dissolved, set it aside to cool in a safe place.
256 grams Goats Milk, 128 grams Soapmaking Lye
Put the coconut oil, olive oil, sunflower oil, castor oil and cocoa butter into a large glass jug then melt in the microwave using a 30 second blast. Then set aside to cool.
315 grams Coconut Oil, 360 grams Olive Oil, 100 grams Sunflower Oil, 80 grams Castor Oil, 45 grams Cocoa Butter
Now we need to balance the oils and the lye. They should be between 120f and 90f (49c 60c)
Once balanced, pour the lye into the oils. Do this slowly to avoid splashing
Using a blender, stir your mixture for several minutes before switching it on.
Turn the blender on and give your mixture a few short 3 second blitz, stirring between each burst.
Continue until the batter thickens and leaves a thin trace on the surface of the batter before disappearing back into the mixture.
Now you can add the rosemary and mint essential oils. Then give it another few blasts with the blender until it thickens but remains liquid.
15 grams Rosemary Essential Oil, 15 grams Peppermint Essential Oil
Next, transfer the soap to the mold. If the mixture is too thick to pour, then you might need to spoon it in instead.
Pop the mold into the fridge for 24hrs to harden. Take it out of the fridge and leave for a further 24hrs before popping it out of the mold.
Remember it will still be a bit caustic until cured so put on your gloves before releasing it. It will then need to be cut.
The goat milk soap will need to cure for around 4 weeks before it is ready for use. Let the soaps sit and air in a cool dry place, remembering to rotate them weekly.
Category: Soapmaking
Cuisine: N/A
Difficulty: Intermediate
Tried This ProjectMention @savvyhomemade or Tag me! #savvyhomemade
Creamy Goats Milk Soap Recipe
This is a creamy medium to soft homemade milk soap with lots of bubble lather and the beautiful aroma of ylang ylang essential oil. This goat milk soap recipe leaves your skin feeling so soft and smooth,it’s a must make for all soap makers.
Ingredients
Makes around 12 bars (I’ve used a cutlery bin to make a nice half moon soap shape, you can find an example of this bin here Soap Making Supplies).
- 240g (8.5oz) Shortening (vegetable fat)
- 350g (12.3oz) Olive Oil
- 350g (12.3oz) Sunflower Oil
- 60g (2.1oz) Beeswax
- 300g (10.6oz) Fresh goat’s milk
- 126g (4.45oz) Lye (Sodium Hydroxide/Caustic Soda)
- 30g (1oz) Ylang Ylang essential oil or Lavender essential oil
Method
Follow the steps below using the cold process method.
- A few hours or the day before making the soap, weigh the goat’s milk and pour it into ice cube trays for freezing.
- Gather your soap making equipment and ingredients, and put on your protective gear, rubber gloves, face mask, and goggles.
- Place the frozen milk into a pyrex jug, then put the jug into a safe place such as a sink and add the lye/caustic soda and stir until the lye has fully dissolved. Set aside and leave to cool to around 140f (60c) to 120f (49c).
- Meanwhile; gently melt the shortening, beeswax, and olive oil in a stainless steel pan on the stove or in a heatproof glass jug in the microwave using 30-second bursts. Once melted add the sunflower oil. Adding the sunflower oil at room temperature rather than warming it will help the oils to cool quicker. You are aiming for the oils to cool to around 140f (60c) to 120f (49) to match the lye solution.
- When both the lye and oils are between 140f (60c) to 120f (49) they are ready to combine. When adding the lye to the oils I always prefer to start mixing them manually with a spatula before moving on to an electric hand blender. This is just a personal preference and I only give it a few stirs before switching. The important thing here is to add the lye to the oils rather than adding the oils to the lye.
- Before putting the stick blender into the soap batter give it a quick blitz just to make sure there are no hidden air bubbles trapped in the blender. Blend the batter using 30-second bursts, stirring and checking for trace between each burst. Trace is when you can trickle a little of the soap back into the batter and it leaves behind a trace before disappearing back into the batter.
- Once the batter has reached trace, go back to using a spatula and stir in the ylang-ylang essential oil.
- As soon as the essential oil has been mixed into the soap batter, get it into the mold. The soap can thicken quickly when things are added to it, so you don’t want to hang around here. If the soap does become too thick to pour, use a spoon to transfer it, and then give the mold a couple of taps on the counter to level it out a bit. You may also need to smooth the surface of the soap with the spatula or the flat part of the spoon.
- Leave to harden for around 24 hours before removing it from the mold.
- Once the soap has hardened, remove it from the mold and cut it into bars. The bars will need to cure for four weeks before they will be mild enough to use. To cure them stand the bars upright with around a ¼ inch between them, they will also need to be turned once a week.
Photos From Making This Soap
Yummy Homemade Chocolate Soap
This homemade chocolate soap recipe containsfresh goats milk, it’s great fun andhas such a wonderful rich brown color. It’s a perfectsoap for cubing up and adding to other white based soaps (see vanilla choc chip soap).
On its own this soap does have a mild milky chocolate scent, but personally if I’m going to make a rich looking chocolate soap I want a rich chocolatey smell. Adding a teaspoon or two of chocolate fragrance oil gives this soap just the scent I like.
Ingredients
This recipe produces a hard soap with lots of creamy bubbles and makes about 12 bars
- 375g (13.2oz) Shortening (vegetable fat)
- 250g (8.8oz) Tallow (dripping)
- 375g (13.2oz) Coconut Oil
- 15g (0.5oz) Plain dark cooking chocolate (semi-sweet)
- 200g (7oz) Distilled water
- 100g (3.5oz) Fresh goats milk
- 150g (5.2oz) Lye (Sodium Hydroxide/Caustic Soda)
- 30g (1oz) Chocolate fragrance oil (optional)
Method
Follow the steps below using the cold process method.
A quick word of warning; when cutting into the soap you may find the inside of the soap much lighter than its outer shell, this will darken within a couple of days so don’t panic. You may also notice a strong goats milk odor in the soap, once again don’t panic this will fade away.
- A few hours or the day before making the soap, weigh the goat’s milk and pour it into ice cube trays for freezing.
- Gather your soap making equipment and ingredients, and put on your protective gear, rubber gloves, face mask, and goggles. Weigh the distilled water and place it into a good-sized heavy-duty plastic or Pyrex jug. Add the frozen milk to the water then Place the jug into a safe place such as a sink and add the Lye/ caustic soda and stir until the lye has fully dissolved. Set aside and leave to cool to around 140f (60c) to 120f (49c).
- Meanwhile; gently melt the shortening, tallow, coconut oil, and chocolate in a stainless steel pan on the stove or in a heatproof glass jug in the microwave using 30-second bursts. Then, allow to cool. You are aiming for the oils to cool to around 140f (60c) to 120f (49) to match the lye solution.
- When both the lye and oils are between 140f (60c) to 120f (49) they are ready to combine. When adding the lye to the oils I always prefer to start mixing them manually with a spatula before moving on to an electric hand blender. This is just a personal preference and I only give it a few stirs before switching. The important thing here is to add the lye to the oils rather than adding the oils to the lye.
- Before putting the stick blender into the soap batter give it a quick blitz just to make sure there are no hidden air bubbles trapped in the blender. Blend the batter using 30-second bursts, stirring and checking for trace between each burst. Trace is when you can trickle a little of the soap back into the batter and it leaves behind a trace before disappearing back into the batter.
- Once the batter has reached trace, go back to using a spatula and stir in the chocolate fragrance oil if using.
- As soon as the fragrance oil has been mixed into the soap batter, get it into the mold. The soap can thicken quickly when things are added to it, so you don’t want to hang around here. If the soap does become too thick to pour, use a spoon to transfer it, and then give the mold a couple of taps on the counter to level it out a bit. You may also need to smooth the surface of the soap with the spatula or the flat part of the spoon.
- Cover the mold with a piece of cardboard, and place a towel over it to keep it warm. This will allow the soap to gel creating a darker rich color. The soap will need to harden for around 24 hours before removing it from the mold.
- Once the soap has hardened, remove it from the mold and cut it into bars. The bars will need to cure for four weeks before they will be mild enough to use. To cure them stand the bars upright with around a ¼ inch between them, they will also need to be turned once a week.
Photos From Making Homemade Chocolate Soap
So there we have it, three great ways to incorporate goat’s milk into your soaps! I love to play around with different ingredients in my soap formulations, and goat’s milk can make a bar of soap so much more luxurious.
Another great ingredient to try is coconut milk! My coconut and lime soap uses coconut milk in a similar way to the goats milk soap recipes, and it feels amazing on your skin. Definitely take a look at it if you’re interested in using different types of milk in your soaps.
Last but not least, don’t forget to follow us on social media. Facebook and Instagram are great ways to stay up to date on everything we’re doing here on Savvhomemade.
Soap Calculator & Formulation Guide
Select your chosen oils, along with the weight or percentage. The soap calculator will then show the total weight of lye and water required. The result can be instantly adjusted by changing your preferred superfatting level or water/lye ratio.
Try The Soap Calculator
You May Also Enjoy:
- Mildly Exfoliating Salt Soap Bar Recipe
- 4 Soap Making Methods For Beginners
